Page Comparison

...

1. Press the mail envelope button or by pressing *86 on the keypad.
2. You will be asked to enter your password and then press the # key. The default password is 258369147258.
3. Once logged in you will be asked to change your password. There are a number of password requirements that the system needs to be met before it will accept your new password:
   1. Must be at least 6 digits, but no more than 8.
   2. Cannot be the last passcode.
   3. Cannot be repeating patterns (example: 121212)
   4. Cannot be the user's own extension or phone number.
   5. Cannot be the user's own extension or phone number reversed/backwards.
   6. Cannot contain 3 or more repeated digits.
   7. Cannot contain more than 3 sequentially ascending digits or 3 sequentially descending digits (example: 123 or 321)
4. Enter a new password and then press the # key.
5. Enter your new password again followed by the # key.
6. You will then be asked to record the name for the mailbox. State your name when prompted and if you are happy with the name, press the # key. If you would like to record a different name press the * key.
   1. Note: If the automated system does not ask you to record your name, it will continue using the previously recorded name until you change it. Follow the steps under the header for Recorded Name in this Confluence article.
7. You will then be given additional options such as listening to messages, recording a VM greeting, etc.
8. Once completed you can hang up your phone. Future logins will use your new password.

...