...
The Device Registration Portal is a webpage that allows Bethel users to register their smart devices to Bethel's wireless network for connection over Wi-Fi. This is especially helpful for devices such as video game consoles, smart TVs, Amazon Alexa, Chromebooks, Android phones, etc that are unable to connect to the Bethel or Bethel-Guest wireless networks normally.
To register a device, please follow the step-by-step instructions below. Please email the ITS Help Desk at helpdesk@bethel.edu with any questions or issues during the device registration process.
- On a computer, open your preferred web browser and navigate to <https://registration.its.bethel.edu>.
| Note |
|---|
If you have connected your device to the Bethel-Guest network without registering it, you will need to wait at least 24 hours for the network to disconnect your device automatically before registering your device. The Bethel-Guest network has a disconnect policy much like hotel or airport Wi-Fi networks where it will kick the device off the network after a specific period of time. This device registration portal is a way to bypass this repeated disconnection. |
- Type in your Bethel username (without the "@bethel.edu" email signature) and password in the appropriate fields and click Sign onIn.
This will pop up the page titled manage devices. Click add
- Note: If you receive a login error
- The menu page will load for Manage Devices. Click the Add button to add a new device.
- The Add Device page will load with entry boxes for Device Name,
After that, choose what you would like to call your device. Device ID, and an optional entry for Description.
- In the text box labeled Device Name, enter a name to identify the device you are adding.
Note Note: If you receive an error when submitting this form, ensure that the Device Name entered does not have an apostrophe or other special characters. For example, titling your device "Josh's Xbox" will not work but "Josh Xbox" or "Joshs Xbox" will accept.
- In the text box labeled
MAC address- Device ID, type in the MAC address of your device
and click add Submit- .
| Note |
|---|
Note: The MAC address can be found |
...
either printed on the outside of the device or located within the device's network settings menu. If it isn't labeled simply as "MAC address", it may be labeled as "Wi-Fi address", "Wi-Fi MAC address", "wireless MAC address", or "WLAN MAC address". The format is always the same: 12 characters total, 6 pairs of letters and numbers separated by colons or hyphens (e.g., 0A:1B:2C:3D:4E:5F or 0A-1B-2C-3D-4E-5F). |
- In the text box labeled Description, you may enter a description of the device you are adding. This field is not necessary in order to register the device and is optional. The same "no apostrophe or special character" requirements from the Device Name field may apply.
- Once the device has been registered you can see it , it will be located in the list of managed devices Managed Devices. You will know that it is connected ready to connect if you see Pending next to the device.Go onto
- Connect the device to the Wi-Fi network titled Bethel-Guest and confirm if internet connection is now working. If you are attempting to connect and enjoy streaming on Bethel's networkexperience errors that are not covered in the Common Errors section below, please email the ITS Help Desk at helpdesk@bethel.edu with screenshots (if applicable) and a description of your issue.
| Expand | ||
|---|---|---|
| ||
The Device ID already exists error indicates that the MAC address you attempted to register has already been connected to the Bethel-Guest network and you'll need to "forget" the network on the device and wait 24-48 hours for it to be removed from the system before registering it.
The Error Loading Page is most often indicative of using a character that is not allowed in the Name or Description of the device. In the example above, the apostrophe is causing the error. Remove the offending character and the device will be able to be added. |
